Tag Archives: Possible Reasons For Your ESP BAS Warning Light Coming On

ESP BAS Warning Light Mean

An ESP BAS Warning Light indicates issues with the Electronic Stability Program or Brake Assist System. These two systems enable you to stop the car without locking the brakes or skidding while maintaining control of it in slick conditions. They are essential for one’s safety.

What causes the ESP BAS light to come on?

The most common causes of an ESP BAS warning light coming on are listed below:

  • Faulty Steering Angle Sensor
  • Failure in the brake switch
  • Faulty Wheel Speed Sensor
  • Bad Brake Pads and Calipers
  • Issues with the wiring

Is it safe to drive with the ESP BAS Warning Light on?

It is not safe to drive with the ESP BAS warning light on, especially in slick conditions. This is because the ESP BAS light indicates that there are issues with the vehicle’s electronic stability program or brake assist system. Driving with ESP BAS warning light on the dash is dangerous because the problem may cause you to lose control of the vehicle in bad weather conditions.

How can you reset the ESP BAS Warning Light?

The common cause of ESP BAS warning light on is a failing steering angle sensor that needs recalibration. If this is the root cause, the process of recalibrating it is quite simple. To reset it and turn off the warning light, turn the steering wheel twice to the right and twice to the left. After that, return the steering wheel to the center to complete the reset procedure and stop the car. This ought to have reset the ESP BAS warning light, so it should be turned off. If not, there may be a problem with the electronic stability program in your automobile or perhaps a problem with the ESP sensor itself.

How to Fix ESP BAS Warning Light?

The best course of action is to let a certified technician diagnose the problem and repair your car. But if I have a good knowledge of auto mechanics and electricity and you decide to try and fix the problem yourself, here are some steps to follow.

First start by checking your vehicle’s owner’s manual to see what the warning light means for your specific make and model. This will give you an idea of what might be wrong with your vehicle.

Second you need to scan for OBD2 Trouble Code (DTC) using OBD2 scanner.  Then you can take your code to the internet to find the cause of your fault and how to fix it. It could be a faulty Wheel Speed Sensor, Bad Steering Angle Sensor, or Faulty Brake Switch. Once you know what the problem is and how to fix, you can purchase the necessary replacement parts and install them.

Once everything is fixed, it’s time to erase the codes. Rescan the vehicle with OBD2 scanner and clear the trouble code. You will also see the ESP BAS warning light goes off.

However, if you can’t find the information you need online — or you don’t feel comfortable attempting repairs yourself—and the warning light on the car is still illuminated. We recommend getting to the service station to find out what the problem is or consider calling your local dealership for help.

Disclaimer

The content contained in this article is for entertainment and informational purposes only and should not be used in lieu of seeking professional advice from a certified technician or expert mechanic. We encourage you to consult with a certified technician or mechanic if you have specific questions or concerns relating to any of the topics covered herein. Under no circumstances will we be liable for any loss or damage caused by your reliance on any content.