DTC P007A Charge Air Cooler Temperature Sensor Circuit Bank 1

DTC P007A is a diagnostic trouble code that indicates an issue with the charge air cooler temperature sensor circuit on Bank 1. This sensor is vital for monitoring the temperature of the air entering the engine after being cooled by the intercooler, which is crucial for optimal engine performance and efficiency. In this article, we’ll delve into the details of DTC P007A, exploring what it means, its potential causes, and how to diagnose and fix this issue effectively.

What is DTC P007A?

The P007A diagnostic trouble code (DTC) signifies a malfunction in the charge air cooler temperature sensor circuit for Bank 1. This sensor measures the temperature of the air after it passes through the intercooler, which helps in regulating the air-fuel mixture for optimal combustion. When the ECU detects a problem with the sensor or its circuit, such as an open or short circuit, it sets the P007A code and may trigger the Check Engine Light (CEL). Proper functioning of this sensor is essential for maintaining engine performance and fuel efficiency.

Potential Causes of DTC P007A:

The P007A code is triggered when the ECU detects an abnormality in the charge air cooler temperature sensor circuit for Bank 1. This can happen due to several reasons:

  • Faulty Charge Air Cooler Temperature Sensor: The most common cause is a malfunctioning sensor that fails to provide accurate temperature readings.
  • Wiring Issues: Damaged, corroded, or shorted wiring or connectors associated with the sensor circuit can disrupt the signal.
  • Connector Problems: Loose or corroded connectors can interfere with the electrical connection to the sensor.
  • ECU Issues: Although rare, a malfunctioning ECU could incorrectly interpret the signals from the sensor circuit.
  • Intercooler Problems: Issues with the intercooler itself, such as blockages or leaks, can affect the sensor readings.

Symptoms of P007A:

When the P007A code is set, you might experience the following symptoms:

  • Check Engine Light (CEL) illuminated on the dashboard.
  • Reduced engine performance.
  • Possible decrease in fuel efficiency.
  • Increased emissions.
  • Engine may run rough or have reduced power.

Diagnostic and Repair Procedures for DTC P007A:

Diagnosing and resolving the P007A code requires a systematic approach:

  1. Initial Inspection: Connect a diagnostic scanner to the vehicle’s OBD-II port to retrieve the trouble codes, including P007A. Record any additional codes and freeze frame data to understand the conditions under which the code was set.
  2. Visual Inspection: Conduct a thorough visual inspection of the charge air cooler temperature sensor and its wiring harness. Look for signs of damage, corrosion, or disconnection.
  3. Test the Sensor: Use a multimeter to check the resistance of the sensor. Compare the readings with the manufacturer’s specifications. Replace the sensor if it is out of the specified range.
  4. Check Wiring and Connectors: Inspect the wiring and connectors for the sensor for any signs of damage, corrosion, or incorrect routing. Repair or replace any damaged wiring as necessary.
  5. Inspect the ECU: Although rare, inspect the ECU for any potential faults or software issues that could cause incorrect interpretation of signals. Reprogram or replace the ECU if necessary.
  6. Check the Intercooler: Ensure that the intercooler is functioning properly. Look for blockages, leaks, or other issues that could affect the temperature of the charge air.
  7. Clear Codes and Perform Test Drive: After completing the repairs, clear the trouble codes from the vehicle’s memory using the diagnostic scanner. Perform a test drive to ensure the vehicle operates properly and that the P007A code does not return.


Understanding and addressing DTC P007A is essential for maintaining optimal engine performance and fuel efficiency. By following these detailed diagnostic and repair procedures, you can effectively address the P007A trouble code, ensuring the charge air cooler temperature sensor circuit functions correctly. Regular maintenance and careful inspection of the sensor and its wiring can help prevent this code from appearing. If you found this guide helpful, please share it with fellow automotive enthusiasts and technicians. For more detailed guides and tips on car maintenance and repair, visit our website.