DTC P0725 Engine Speed input Circuit Malfunction

DTC P0725 refers to a problem within the Engine Speed Input Circuit. This error code gets stored when the Engine Control Module (ECM) or Transmission Control Module (TCM) does not receive a proper signal from the engine speed sensor.

1. What does P0725 code mean?

P0725 code indicates that the ECM or TCM did not receive a correct signal from the engine speed sensor. The engine speed sensor, also known as the crankshaft position sensor, monitors the rotational speed of the engine’s crankshaft and sends this information to the ECM or TCM for various control functions.

2. What are the causes of DTC P0725?

The potential causes of DTC P0725 include:

  • Faulty Engine Speed Sensor: A malfunctioning or failed engine speed sensor can lead to inaccurate or no signal transmission.
  • Wiring Issues: Damaged, corroded, or shorted wiring in the engine speed sensor circuit can disrupt signal transmission.
  • Poor Sensor Connection: Loose or poor connections at the engine speed sensor or its connectors might cause signal loss.
  • ECM or TCM Problems: Rarely, issues within the ECM or TCM might prevent proper communication with the engine speed sensor.
  • Timing Chain or Belt Issues: Problems with the engine’s timing chain or belt can affect the signal generated by the engine speed sensor.

3. What are the symptoms of DTC P0725?

Signs associated with DTC P0725 might include:

  • Check Engine Light: Illumination of the Check Engine Light due to the detected issue with the engine speed sensor circuit.
  • Engine Misfires: Potential engine misfires or irregularities in engine operation due to inaccurate engine speed readings.
  • Transmission Issues: Erratic shifting, transmission hesitation, or failure to shift gears properly in automatic transmissions due to incorrect engine speed signals.

4. How to diagnose DTC P0725?

Diagnostic steps for DTC P0725 may include:

  • Code Reading: Use an OBD-II scanner to retrieve the code and identify any accompanying codes stored in the ECM or TCM.
  • Visual Inspection: Examine the engine speed sensor, wiring, and connectors for physical damage, corrosion, or loose connections.
  • Sensor Testing: Test the engine speed sensor’s functionality and voltage output to ensure it is sending accurate signals.
  • Circuit Testing: Check the circuit for shorts, open circuits, or high resistance to identify issues within the engine speed sensor circuit.

5. How to fix DTC P0725 problem?

Steps to resolve DTC P0725 might include:

  • Engine Speed Sensor Replacement: Replace the engine speed sensor if it’s found to be malfunctioning or providing inaccurate signals.
  • Wiring Repair: Fix or replace damaged wiring and ensure secure connections within the engine speed sensor circuit.
  • Connector Check: Repair or replace damaged connectors to ensure a stable electrical connection.
  • ECM or TCM Inspection: Rarely, issues within the ECM or TCM might be causing communication problems and might require professional diagnosis and repair.


DTC P0725 indicates a malfunction or lack of signal from the engine speed sensor, potentially causing engine misfires, transmission irregularities, and illumination of the Check Engine Light. Addressing this issue involves inspecting, testing, and potentially replacing the engine speed sensor, associated wiring, or connectors to ensure accurate signal transmission and proper engine and transmission functionality.